From: George Hong <ghong@iasiaworks.com>
Thanks, Jim. That would explain why I always fail to get the value I want. We
use 2924XL. This saves me a lot of time.
Good day.
--George
"Jim D. Kirby" wrote:
> Are you trying to access a 2900 or a Catalyst 2900XL? There's a huge
> difference in these switches. The straight 2900 (I used a 2926) switches
> are lower end models of the Catalyst 5500 and now 6500 series. They have
> different (read, "weird") OSes that do not conform to Cisco's IOS specs.
>
> The Catalyst 2900XL switches (we use 2924XL primarily) use a Cisco standard
> IOS operating system.
>
> These two switches are similiar in name only. They are based on completely
> different hardware models, have completely different OSes, and completely
> Different MIBS. The 2900 MIB on CCO is for the brown Cat 2900 (5500-alike)
> switches only. The only MIB I've ever found for the XL series (which now
> includes the 3500 series) is the woefully out of date CISCO-STACK (or
> something like that) MIB.
>
> As far as I've been able to tell, the 2900XL series does not have any
> Bandwidth (backplane utilization) measurements since the switch doesn't have
> a backplane in the 2900/5500/6500 sense.
>
> HTH,
> jk
>
> > -----Original Message-----
> > From: George Hong [mailto:ghong@iasiaworks.com]
> > Sent: Monday, January 10, 2000 5:59 PM
> > To: Ivan Berg
> > Cc: Hugo Gayosso; cricket-users@onelist.com
> > Subject: Re: [cricket-users] OID for cisco 2900
> >
> >
> > From: George Hong <ghong@iasiaworks.com>
> >
> > Thanks, Ivan. After adding the leading ".", it came back with:
> > Error in packet
> > Reason: (noSuchName) There is no such variable name in this MIB.
> > This name doesn't exist: enterprises.9.9.87.1.5
> >
> > What could be wrong?
> > Good day.
> > --George
> >
> > Ivan Berg wrote:
> >
> > > Add a leading "." to the OID
> > > Consult the man page for the snmp utility to find out why
> > >
> > >
> > ______________________________________________________________
> > ____________
> > >
> > > On Mon, 10 Jan 2000, George Hong wrote:
> > >
> > > > From: George Hong <ghong@iasiaworks.com>
> > > >
> > > > Hi Hugo,
> > > > Thanks for the tip. I went to the site and find the MIB
> > for 2900 under pub/oid
> > > > directory. snmpget doesn't return the value, any suggestion?
> > > > Here is the log:
> > > >
> > > > "c2900BandwidthUsage" "1.3.6.1.4.1.9.9.87.1.5"
> > > >
> > > > >snmpget switch_ip_address public_snmp 1.3.6.1.4.1.9.9.87.1.5
> > > > Error in packet
> > > > Reason: (noSuchName) There is no such variable name in this MIB.
> > > > This name doesn't exist: system.sysUpTime.6.1.4.1.9.9.87.1.5
> > > >
> > > > Try snmpwalk, nothing either.
> > > >
> > > > Thanks a bunch in advanced.
> > > > --George Hong
> > > >
> > > >
> > > > Hugo Gayosso wrote:
> > > >
> > > > > -----BEGIN PGP SIGNED MESSAGE-----
> > > > > Hash: SHA1
> > > > >
> > > > > Try downloading the MIB from ftp.cisco.com or from
> > somewhere else.
> > > > >
> > > > > Greetings,
> > > > > On 08-Jan-2000 George Hong wrote:
> > > > > > Hi there,
> > > > > > It seems like the oid for cisco 2900 is a lot
> > different from 1900 or
> > > > > > 5500. Anyone knows 2900's oids for 1mincpu, 5mincpu,
> > backplane bandwidth
> > > > > > usage? I tried snmpwalk on the router, can't find
> > something obvious.
> > > > > > Thanks.
> > > > > > --George
> > > > > >
> > > > > >
> > > > > > --------------------------- ONElist Sponsor
> > ----------------------------
> > > > > >
> > > > > > Hey Freelancers: Find your next project through JobSwarm!
> > > > > > You can even make money in your sleep by referring friends.
> > > > > > <a href=" http://clickme.onelist.com/ad/jobswarm1
> > ">Click Here</a>
> > > > > >
> > > > > >
> > --------------------------------------------------------------
> > ----------
> > > > >
> > > > > - --
> > > > > Hugo Gayosso | The ultimate
> > result is that some
> > > > > Controls Process Support | innovations
> > that would truly
> > > > > Electronics Integration and Software | benefit
> > consumers never occur
> > > > > GM Powertrain | for the sole
> > reason that they
> > > > > Brighton, MI | do not
> > coincide with Microsoft's
> > > > > USA | self-interest.
> > > > > |
> > > > > E-Mail: qztf7k@powertrain.mpg.gm.com |
> > Thomas Penfield Jackson
> > > > > Phone: (810) 220-2635 |
> > U.S. District Judge
> > > > > Fax: (810) 220-2663 |
> > > > >
> > > > > -----BEGIN PGP SIGNATURE-----
> > > > > Version: GnuPG v1.0.1 (GNU/Linux)
> > > > > Comment: For info see http://www.gnupg.org
> > > > >
> > > > > iD8DBQE4edvHx2JZtTN6co8RAv73AJ4tS9CM36S8krFHg2Nrr0GOb24qqwCgkDbN
> > > > > 9+UrPg0Ih2aOs9XB0TlkLmI=
> > > > > =Jfs0
> > > > > -----END PGP SIGNATURE-----
> > > >
> > > >
> > > > --------------------------- ONElist Sponsor
> > ----------------------------
> > > >
> > > > Independent contractors: Find your next project gig
> > through JobSwarm!
> > > > You can even make money by referring friends.
> > > > <a href=" http://clickme.onelist.com/ad/jobswarm2 ">Click Here</a>
> > > >
> > > >
> > --------------------------------------------------------------
> > ----------
> > > >
> > > >
> >
> >
> > --------------------------- ONElist Sponsor
> > ----------------------------
> >
> > Independent contractors: Find your next project gig through JobSwarm!
> > You can even make money by referring friends.
> > <a href=" http://clickme.onelist.com/ad/jobswarm2 ">Click Here</a>
> >
> > --------------------------------------------------------------
> > ----------
> >
--------------------------- ONElist Sponsor ----------------------------
Hey Freelancers: Find your next project through JobSwarm!
You can even make money in your sleep by referring friends.
<a href=" http://clickme.onelist.com/ad/jobswarm1 ">Click Here</a>
------------------------------------------------------------------------
This archive was generated by hypermail 2b29 : Mon Mar 06 2000 - 19:01:11 PST